PORCELAIN LAMINATE TEETH

PORCELAIN LAMINATE TEETH

It means leaf in Latin. It is a method that is performed by thinning only the front surfaces of the teeth by 0.3-0.7 mm without cutting them, and causes the least loss of healthy tooth tissue. This is the process of gluing porcelain dental laminates to the thinned area.

  • In extremely discolored teeth where whitening cannot be achieved,
  • In teeth with poor structural form and shape,
  • In joining separate teeth(diastema closure),
  • In the restoration of broken or worn teeth,
  • Old fillings with damaged color and structure It can be an almost perfect cosmetic alternative for correcting crooked and crooked teeth (as an orthodontic treatment alternative).
  • <
  • Who can receive porcelain laminate dental treatment?

  • Porcelain laminate dental treatment is almost always available. It can be applied to everyone.

    So, are there any situations where the treatment of porcelain dental laminates cannot be applied?

    Bad habits such as jaw disorders, nail biting, pencil biting cannot be applied in cases where there is severe gingival recession.

    If your gums do not require any treatment or aesthetic intervention, you can have a new smile in 2-3 sessions, that is, within 1 week.

    In the first session, your teeth are measured without being worn down and a study is done on the resulting model. Then, the teeth are abraded and the impression is repeated with a sensitive impression material. At your next appointment, laminates are applied to your teeth.

    No. Adhesion value of today's bonding technologies are very high. If the dentist acts with technical precision in practice, you can use your laminates as if they were your own teeth.

    With good oral care, laminates can be used for years without any problems. The reason for this is that they are made of porcelain, which has superior properties than other bonding systems. They are more resistant to staining and abrasion. To prolong their life, it is necessary to pay attention to oral care. Additionally, it is necessary to avoid bad habits such as biting very hard foods and biting nails.

    The desired appearance is achieved with 0.3-0.7 mm etching process. The procedure takes an average of 7-10 days.
    They are produced from solid, color-fast and durable materials.
    Porcelain laminate ensures that it has the aesthetic features you want (such as color and shape) without damaging the natural structure of your teeth. It can be done with . Either no change is made on the tooth or only a minor correction is applied. The amount removed from the tooth is limited to 0.3-0.7 mm. Thus, there is no need to cut (reduce) any teeth.

    A copy of the teeth that you are not happy with is obtained and a design is made on it. In other words, before intervening on the teeth, the changes to be made in the teeth can be shown as a demo at the beginning of the treatment. This demo is called mock-up.

    Porcelain surfaces are smooth, therefore it minimizes stains and tartar formation caused by smoking and similar reasons.
    Such as coffee, tea, cigarettes. It does not change color due to external factors.

    It is quite fragile as a material. However, when it is fully bonded to the enamel, its resistance to tensile and tensile forces increases significantly. For example, it is not possible to completely remove a stuck veneer from the tooth. However, it can be removed by abrasion from the tooth surface with diamond burs.

    It has high resistance to abrasion.

    It has advantages in terms of health and aesthetics compared to other restorations. However, it is a slightly more expensive system compared to others.

    It is a sensitive technique. It requires good clinical and laboratory studies. The physician and the dental technician must have sufficient technical knowledge and artistic ability on this subject.

    • Laminate Veneer

    Laminate porcelain is an aesthetic application obtained by gluing thin sheet porcelains prepared in the laboratory to the front of this smoothed tooth surface by smoothing the front surface of the tooth a little without damaging the original of the tooth.

    Area of ​​use

  • To restore aesthetics in worn, decayed and broken teeth for various reasons,
  • Tooth whitening with chemical whitening. To obtain whiter and straighter teeth in cases where they cannot be whitened.
  • To remove the congenital spaced tooth structure or to give small teeth a wider and larger appearance.
  • To prepare a more aesthetic, more sympathetic smile design for the person
  • With a small intervention, a healthy and natural appearance is achieved in a very short time,
  • Only opening a slot the width of a fingernail in your tooth (which may not always be necessary) is sufficient,
  • Sturdy, colors They are produced from non-perishable and durable materials.
    • Are laminates long-lasting? Is it durable?

    Laminates can be used for years without any problems with good oral care. Because they are made of porcelain, which has superior properties than other adhesive systems. They are more resistant to staining and abrasion. To prolong their life, it is necessary to pay attention to oral care. Additionally, it is necessary to avoid bad habits such as biting very hard foods and biting nails.

     

    Read: 0

    yodax