HOW IS COMPOSITE LAMINATED DONE?
Local anesthesia is applied to the teeth to be composite laminated.
If there is any decay, it is cleaned.
Composite color suitable for the tooth is selected and the patient's It is placed on the tooth surface in small layers in line with expectations and then hardened with light.
The tooth is brought to the appropriate form. At the last stage, it is polished and the treatment is completed.
TO WHOM CAN COMPOSITE LAMINATE BE MADE?
-
To provide a more aesthetic appearance to teeth that are worn or deformed due to aging,
p> -
If the surface is not regular in the normal structure of the teeth (defective teeth), if there are deformities,
-
To close the gaps between the teeth (diastema closure). ,
-
Trauma to the front teeth, etc. In cases of post-fracture,
-
To eliminate undesirable conditions related to the shape, structure, form or length of the front teeth,
-
Excessively colored If the whitening process has not yielded good results on the teeth that are damaged, ,
-
-
In cases where there is a lot of material loss in the tooth (decay or filling), composite lamination is not suitable. The durability of laminates decreases. Therefore, it is healthier to have veneers in such cases.
How are Porcelain Laminates Made?
Lamina means "leaf" in Latin. It means ''. Porcelain laminate in Çayyolu; They are materials made for aesthetic purposes, prepared in the form of thin leaves on the teeth. Today, aesthetics in dentistry has become a necessity rather than a luxury. Because smiling with crooked teeth that are unpleasant to look at or with tiny teeth that are open and give the impression of having no teeth when viewed from the front; It creates a completely negative impression on the other party. In addition to giving the impression of being careless and careless on the observer, it also creates a lack of self-confidence and self-esteem in the person smiling. However, a beautiful smile shows self-confidence, self-care, completeness, integrity, friendship, warmth. K emotions are awakened on the other side.
Porcelain laminates are aesthetic applications performed on the teeth, sometimes without any abrasion and sometimes with minimum abrasion in the range of 0.3-0.5 mm. The most important reason why it is preferred is that it is done with the least amount of work done on the tooth. It is especially preferred by individuals who want to preserve their natural tooth tissue.
In order to make porcelain laminate using the method we call prepless without any abrasion on the teeth, the structure of the mouth and teeth must be suitable for this. Generally, if there are gaps between the teeth, if there are small teeth and if the jaws close properly, porcelain laminates can be made with the mentioned method without any wear on the teeth. After the preparation process on the teeth, measurements are taken and transferred to the laboratory. In addition to measurements taken with measurement materials, it is possible to take measurements in a very short time with devices we call digital scanners. The measurement taken with a digital scanner is also transferred via e-mail.
After the measurement is sent to the laboratory, 0.3-0.7 mm thick porcelain laminates are produced from special porcelains whose light transmittance and light reflection are very similar to natural tooth tissue.
Prepared in the shape of a leaf. The laminates become ready to adhere to the tooth surface.
Read: 0
