Parents rely on baby car seat manufacturers to keep their babies safe, but some experts say only 15% of baby car seats are installed properly. First, always for safety advice. Read the manufacturer's instructions.
Proper Installation of the Child Seat is Essential
A baby car seat can save your baby's life in the event of an accident. For this, it must be installed correctly. Your child should only ride in this seat every time he or she gets in the car. This is also very important for him/her to know the place and get used to it. There are many types of baby seats. It is important to review your user manual before purchasing. Because some baby car seats may not be compatible with all cars. Before placing the car seat you purchased, read the user manual of the seat carefully and read the recommendations for your car regarding child car seats.
It is recommended to place child seats in the middle rear section, which is the safest place. After placing it, pull the seat firmly. It should not move at all.
If you are going to use the seat with a stroller, it would be a good idea to practice installing and removing the seat in your spare time.
1-) Separate the carrier from the base. Most rear-facing seats consist of two parts: the base and the baby carrier. You will install the part of the car seat that remains inside the car. Follow the manufacturer's instructions to remove the carrier from the base. Usually, there is only one button to activate it.
2-) Fix the top to the backseat of your car. Many car seats include a belt with two hooks that can latch onto designated points near your car's seat belt area. If your automaker includes them, attach the hooks to the metal bars at the designated points.
Tighten the retaining strap attached to the base until the base rests on the seat.
If your vehicle or child car seat does not have this option or you do not know how to use it, check the manufacturer's instructions.
br /> For additional safety, it may be better to tighten the vehicle's seat belt from the base.
3-) Alternatively, for safety Pass the t-belt through the base. If your car seat does not use the anchor system, it is secured in the back seat with the vehicle's seat belt. Insert the strap through the designated holes in the base and tighten. The seat belt must be clean and not twisted or twisted.
If you are not sure, read the instructions to find out where to put the belt.
Every vehicle and child seat is different, so be careful.
Not wearing the seat belt correctly can cause an accident. It may immediately increase the risk of injury to the child.
4-) Place the baby carrier on the base. Place the base on top so that the child is facing backwards. You will hear a click when it is in the correct position. You can then take the carrier (by activating the lever or button) and check whether it is positioned correctly.
5-) Double check the base angle. Rear-facing car seats can often be positioned at different angles. Younger babies need to be in a more horizontal position. This helps them breathe properly.
Most baby carriers have a level indicator. Once your baby is in place, read this level to see if the seat is at the correct angle for their baby's weight/height/age.
If there is an error, check the manufacturer's instructions for an accurate reading of the level.
Baby Car Seat Be Careful When Choosing!
Choose a baby car seat according to your child's age, weight and height. To provide the most protection, newborns should always be in a rear-facing seat. For children who are at least one year old and potentially up to three years old, a rear-facing seat is a good option. For older babies and toddlers, a forward-facing seat makes more sense.
Experts recommend keeping babies in a rear-facing seat whenever possible.
Some car seats are all-in-one, starting in the rear-facing position and It is converted to face forward when your child is available. Check the owner's manual for instructions on how to replace your seat.
Read: 0
